welshboy
|
| posted on 10/2/07 at 03:10 PM |
|
|
seat belt mountings
hi im building a book chassis and fitting 4 point belts the book shows you welding a triangle bit of 3mm plate on the inside of the trailing arm
bracket. is there still going to be room for my seat belt mounting ? do you use the same hole as the trailing arm ? a pick would help if any on could
show me there bottom seat belt mountings thanks
|
|
|
|
|
DIY Si
|
| posted on 10/2/07 at 03:29 PM |
|
|
Some people just use the same bolt for both.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
|
welshboy
|
| posted on 10/2/07 at 04:23 PM |
|
|
and is it ok si for the sva thanks
|
|
|
DIY Si
|
| posted on 10/2/07 at 06:25 PM |
|
|
As long as it's a big/strong enough bolt, then yup. Something in a 10.9 or 12.9 should do fine if you're not sure.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
|
