oadamo
|
 posted on 12/10/07 at 08:20 PM |
|
|
pain in the arse
how long did it take you to do the front brackets for the wishbones. it tuk me about 6 hours to get them right. then i set the lazer bed up at work
put the chassis on it was 4mm out so i had to cut the back off and do it all again.  all because i cut one bit to long but its all done now . was
yours a pain in the asre or is it just me.
adam
|
|
|
|
|
donut
|
| posted on 12/10/07 at 08:26 PM |
|
|
Mine is pre built and it's still a pain in the arris!!!!
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
dr-fastlane
|
| posted on 12/10/07 at 08:31 PM |
|
|
Those that I made ware also “a pain in the arse”. After making the third pair of wishbones it was finally right.
------------------------------
I have not failed once. I have successfully found ways that will not work!
https://www.motor-forum.nl/threads/hardtail-dragstyle-project.343482/
|
|
|
Avoneer
|
| posted on 12/10/07 at 08:49 PM |
|
|
Yep - we've all been there.
I did all this: http://locostbuilders.co.uk/viewthread.php?tid=23808
Then changed my bones: http://locostbuilders.co.uk/viewthread.php?tid=35371&page=2&contribmessage=none
It's all good fun and f*ck me does my car handle well now it's all done.
It's worth it, honest.
Pat...
[Edited on 12/10/07 by Avoneer]
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
oadamo
|
| posted on 12/10/07 at 08:59 PM |
|
|
quote:
Originally posted by Avoneer
Yep - we've all been there.
I did all this: http://locostbuilders.co.uk/viewthread.php?tid=23808
Then changed my bones: http://locostbuilders.co.uk/viewthread.php?tid=35371&page=2&contribmessage=none
It's all good fun and f*ck me does my car handle well now it's all done.
It's worth it, honest.
Pat...
[Edited on 12/10/07 by Avoneer]
***k me why didnt i see this before i done mine pmsl
thanks adam
|
|
|
Avoneer
|
| posted on 12/10/07 at 09:23 PM |
|
|
Hope it made you feel better.
It took me a fair few weeks to get all that sorted!
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Volvorsport
|
| posted on 12/10/07 at 10:17 PM |
|
|
crikey , forgotten about that !
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
TGR-ECOSSE
|
| posted on 12/10/07 at 10:27 PM |
|
|
F*****g pain in the F*****g everything alright. Don't get me started  Must go need more dizzy juice now
|
|
|
Avoneer
|
| posted on 13/10/07 at 12:00 AM |
|
|
Yep - top shocks supplied by Mr Volvorsport and still going strong.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
caber
|
| posted on 13/10/07 at 12:22 AM |
|
|
Worst bit of build 3, attempts still not 100% sure they are right The way I did it was jig the bones up and offer the entire assembly to the
chassis eventually got it right only to find top wishbones were wrong length when I put the wheels on!
Caber
|
|
|
%20(WinCE).JPG)
