liam.mccaffrey
|
| posted on 19/11/07 at 09:29 PM |
|
|
Bill of Materials
Just after some help with a rough bill of materials for my +4 chassis. I won't have my books for a while.
This is the second time i have done this (first one abandoned) but from memory
80' of 1"x1" 16 gauge box
20' of 3/4" round DOM for suspension-What wall thickness???
20' of 2" DOM for rollcage What wall thickness???
3 of 8'x4' Ali sheets
I won't need any steel plate we have the best scrap bin in the world at work!
Can anybody think of anything else I will need to order?
Thanks
[Edited on 19/11/07 by liam.mccaffrey]
Build Blog
Build Photo Album
|
|
|
|
|
mark chandler
|
| posted on 19/11/07 at 10:07 PM |
|
|
Small tub of elbow grease plus a pot of wisdom.
Also a "putting on" file may be useful for those awkward cuts
|
|
|
RazMan
|
| posted on 20/11/07 at 11:20 AM |
|
|
A large box of 12mm holes - I used loads!
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
iank
|
| posted on 20/11/07 at 12:00 PM |
|
|
bag of sparks for the angle grinder 
or more seriously take the BOM from http://mcsorley.net/locost/ and add another couple of lengths to cover the tubes that are 4" longer.
[Edited on 20/11/07 by iank]
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
