Metcalfe
|
 posted on 6/5/08 at 02:02 PM |
|
|
What Grp Kit
I have a Locost chasiss having problems getting the right grp kit. I am using a pinto so struggling with the height i need to clear 150mm from the top
the horizontal chasiss to the top of the rocker cover if any body can point me in the right direction would appreciate it as i really dont want to
put a sccop or bulge. cheers!!!!!
|
|
|
|
|
tegwin
|
| posted on 6/5/08 at 02:07 PM |
|
|
http://locostbuilders.co.uk/viewthread.php?tid=88577&page=&contribmessage=none
|
|
|
sprouts-car
|
| posted on 6/5/08 at 03:19 PM |
|
|
quote:
Originally posted by tegwin
http://locostbuilders.co.uk/viewthread.php?tid=88577&page=&contribmessage=none
Great minds think alike, and fools seldom differ 
Chris
|
|
|
Metcalfe
|
| posted on 6/5/08 at 03:33 PM |
|
|
Thanks for the link, but that doesnt really answer my question. I can get hold of kits, but i have been told that certain kits will not fit over the
pulleys on the 2.0 pinto engine.
I wondered if anyone knew the specific kits that will fit my car.
|
|
|
caber
|
| posted on 6/5/08 at 05:02 PM |
|
|
I used a standard nosecone and lifted it so that it just cleared. I fixed a panel under the front to hinge it from and made little winglets that
covered the suspension for SVA and hid the gap. You can see this in my avatar and the photo archive
Caber
|
|
|
vindicator
|
| posted on 6/5/08 at 07:46 PM |
|
|
I have a pinto 2lt in my car.....vindicator cars will help you if you ask.....
|
|
|
