U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Chassis » Chassis painting in the winter...? Water Pumps at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Reply
Author: Subject: Chassis painting in the winter...?
jps
Contributor






Posts 1465
Registered 2/5/12
Location Colchester, Essex
Member Is Offline

Photo Archive Go!
Building: Haynes Roadster
posted on 10/12/13 at 03:31 PM Reply With Quote
Chassis painting in the winter...?

Not something that's easy to track down using the search function!

Next step for me really is painting the chassis. A quick scan of the 'fact sheet' for POR15, which I had intended to use, suggests that it shouldn't be applied in cold temperatures (which is what we're likely to have until about April or possibly May next year....)....


Anyone got experience of this? Should I just find other jobs to see me through the winter?
View User's Profile Visit User's Homepage View All Posts By User U2U Member
nick205
Contributor






Posts 14392
Registered 7/2/02
Location Hampshire (UK)
Member Is Offline

Photo Archive Go!
Building:

posted on 10/12/13 at 03:50 PM Reply With Quote
Can you heat the garage for a few days to make sure the ambient temp is OK and to dry out any moisture?





View User's Profile View All Posts By User U2U Member
snakebelly
More projects than Alan Parsons!






Posts 1397
Registered 11/11/09
Location Shropshire
Member Is Offline

Photo Archive Go!
Building: Tiger GTA and a Transit and a box trailer...and a
posted on 10/12/13 at 03:57 PM Reply With Quote
You can rent a space heater for a day for not a lot of money from most tool hire places, they are noisy but will heat a garage up very quickly, most run on kerosene or diesel. POR 15 from memory cures using moisture so as long as its warm being damp should only help it go off quicker.

HTH
View User's Profile View All Posts By User U2U Member
jps
Contributor






Posts 1465
Registered 2/5/12
Location Colchester, Essex
Member Is Offline

Photo Archive Go!
Building: Haynes Roadster
posted on 10/12/13 at 04:01 PM Reply With Quote
My 'garage' is actually an air-raid shelter which is half buried in the ground - so I expect it will be difficult to bring up to a decent temp - although I haven't tried. Was also somewhat worried about inadvertantly gassing myself somehow...
View User's Profile Visit User's Homepage View All Posts By User U2U Member
snakebelly
More projects than Alan Parsons!






Posts 1397
Registered 11/11/09
Location Shropshire
Member Is Offline

Photo Archive Go!
Building: Tiger GTA and a Transit and a box trailer...and a
posted on 10/12/13 at 04:46 PM Reply With Quote
As long as the air temp is raised the surface temp of the building shouldn't matter, I run mine in a damp old workshop all day with no issues.
View User's Profile View All Posts By User U2U Member
davidimurray
Contributor






Posts 813
Registered 25/1/10
Location South Wales
Member Is Offline

Photo Archive Go!
Building: Haynes Roadster
posted on 10/12/13 at 06:05 PM Reply With Quote
Had you considered epoxy mastic 121. Have a look at rust.co.uk as they have some advice on painting on cold/damp garages.




Gallery 1 http://www.facebook.com/media/set/?set=a.116893465324.130778.601005324
Gallery 2 http://www.facebook.com/media/set/?set=a.245243755324.181913.601005324&l=a9831a9319
Gallery 3 http://www.facebook.com/media/set/?set=a.440671625324.232627.601005324&l=3f0d42c523
Gallery 4 http://www.facebook.com/media/set/?set=a.490098255324.297598.601005324&l=efb083b7df
Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5cd3a
Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=3&l=fe779b358c
Duratec Engine Swap https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f " target="_blank"> https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f
View User's Profile View All Posts By User U2U Member
SALAD
*Winging it since '05*






Posts 830
Registered 22/1/05
Location Dorset
Member Is Offline

Photo Archive Go!
Building: XE Powered GTS Chassis
posted on 10/12/13 at 10:35 PM Reply With Quote
I painted my chassis with Por15 in my mates non insulated shed in winter. I made a bit of a tent around the chassis out of plastic sheeting and had a heater in there.
Years later and the chassis/por15 is as good as when I applied it. It is good tough stuff. I used the grey chassis coat then top coated with the chassis coat black stuff.

I will say though, use a proper decent mask as even with a good vapour mask on, I was floating a little bit so take fresh air breaks!

Also, take your time to methodically work your way around each tube as it is easy to miss bits....but the Por15 high I was on could have contributed to that!
View User's Profile View All Posts By User U2U Member

New Topic New Reply


 LocostBuilders » Forum » Chassis » Chassis painting in the winter...? go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.