gulf zxr
|
| posted on 3/2/07 at 06:42 PM |
|
|
Anyone have an M18 fine pitch tap I could borrow for 10 mins!!
Hi guys, Anyone got an M18 fine threaded tap for the upper wishbone I could borrow as I can't get one of my track rod ends in and need to clean
it with a tap.
Many thanks
Gulf ZXR
|
|
|
|
|
takumi
|
| posted on 3/2/07 at 06:48 PM |
|
|
http://cgi.ebay.
co.uk/TITANIUM-45-PIECE-METRIC-TAP-AND-DIE-SET_W0QQitemZ260079825911QQihZ016QQcategoryZ63918QQrdZ1QQcmdZViewItem
worth considering, for the money
!excellent value. !
Not the ultra higest quality but with cutting lube should last long enough..
nb; they might be all split dies but dont try widening them..they crack with the slightest force.. M18fine typically.. darn..
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
gulf zxr
|
| posted on 3/2/07 at 06:52 PM |
|
|
Thanks for that, only problem I have is that I have a tap and die set that goes up to 12mm but just can't quite justify £34 for a set I will
only use for about 5 mins!!
|
|
|
bob
|
| posted on 3/2/07 at 06:56 PM |
|
|
I could post you mine,just post it back when your finished M18 x 1.5 fine
u2u me your address if want it and i'll post it 1st thing monday unless you fancy a run out to box hill tomorow.
|
|
|
907
|
| posted on 3/2/07 at 08:25 PM |
|
|
I'm a 40 minute drive from Cambridge if your in a hurry and there's no one nearer.
Paul G
|
|
|
bob
|
| posted on 3/2/07 at 08:29 PM |
|
|
I'll leave it up to jason(gulf zxr) paul,i've got the adddress but wont post till monday anyway.
|
|
|
907
|
| posted on 3/2/07 at 08:57 PM |
|
|
OK Bob. Didn't know he had replied to you.
It's just that sometimes one little thing holds you up, and that can be frustrating.
Been there. Got the T shirt, etc.
atb
Paul G
|
|
|
rusty nuts
|
| posted on 3/2/07 at 09:30 PM |
|
|
Think I have one but will need to check in the morning. I'm just the other side of Cambridge about a mile from Addenbrookes if it's any
help .. When you say 18mm fine what pitch do you mean?
|
|
|
gulf zxr
|
| posted on 3/2/07 at 09:43 PM |
|
|
I thought the top wishbone thread was M18 fine ? pitch of 1.5mm?
|
|
|
bob
|
| posted on 4/2/07 at 12:12 AM |
|
|
Pretty sure its a spark plug tap size.
|
|
|
.jpg)
