Dale
|
| posted on 11/3/07 at 07:47 PM |
|
|
firewall side of scuttle
I know the book says to use 16 gauge on the firewall side of the scuttle. I need to use steel as I am welding up the scuttle with some original
donor parts (keeping with the title of the donor).
Has anyone who has done a steel scuttle gone with a thinner gauge.
Dale
Thanks
Dale
my 14 and11 year old boys 22
and 19 now want to drive but have to be 25 before insurance will allow. Finally on the road
|
|
|
|
|
Mark Allanson
|
| posted on 11/3/07 at 08:47 PM |
|
|
Mine is 20g, passed SVA, surely all the firewall has to do is keep out the engine fumes, there is no structural element
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Avoneer
|
| posted on 11/3/07 at 09:02 PM |
|
|
Mine was Tiger GRP and was completely open above the footwell.
No problems with SVA.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
%20(WinCE).JPG)
