Taz Surfleet
|
posted on 30/3/07 at 10:37 AM |
|
|
Bolt stress grades
Hi Chaps
have just taken bought some of Nick Skidmore's (cheers Nick) rose joints in 3/8 unf does any one have a stress grade charts for imperial all the
ones i can find are in metric !
|
|
|
Mr Whippy
|
posted on 30/3/07 at 10:49 AM |
|
|
a die hard imperialist
Fame is when your old car is plastered all over the internet
|
|
t.j.
|
posted on 30/3/07 at 11:04 AM |
|
|
What is imperial??
In Dutch it is a roof-rack
http://www.skf.com/portal/skf/home/products?paf_dm=shared&maincatalogue=1&lang=en&newlink=3_3_11
maybe this: http://euler9.tripod.com/bolt-database/22.html
[Edited on 30/3/07 by t.j.]
|
|
Mr Whippy
|
posted on 30/3/07 at 11:26 AM |
|
|
Imperial was what we were before we gave it all away and became a nothing on the polical ladder...Bring back the Empire!
Fame is when your old car is plastered all over the internet
|
|
Mal
|
posted on 30/3/07 at 11:45 AM |
|
|
UNF strength grades.
I'm not fully up to speed on this, but there appear to be 2 systems for giving this information.
UNF bolts used on British cars of the 60's and 70's were stamped with either: R, S, T, or X. These being inceasing values of either yeild
or UTS figures in tons/ square inch. I think R was 45/55, S 50/60 and T 55/65 from memory.
There is another, more current system which uses different numbers of radial lines stamped on the head.
This site here gives more detail.
www.rockcrawler.com/techreports/fasteners/index.asp
HTH
Mal
|
|
Nick Skidmore
|
posted on 30/3/07 at 03:21 PM |
|
|
I have the best grade Aerospace NAS bolts available from stock for not much more than commercial stuff.
The info I'll need from you will be the diameter which I guess is 3/8 and the distance between the outer edges of the bracket you are bolting
through.
These are 95.000 psi in shear and 160,000 psi in tension without the brittleness of industrial 12.9 grade stuff.
[Edited on 30/3/07 by Nick Skidmore]
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Confused but excited.
|
posted on 30/3/07 at 07:43 PM |
|
|
quote: Originally posted by t.j.
What is imperial?
A natural, God given, system of measurement.
Back off Brussels!
Tell them about the bent treacle edges!
|
|
Macbeast
|
posted on 30/3/07 at 08:22 PM |
|
|
Imperial is the Dutch attitude to Indonesia
|
|
t.j.
|
posted on 30/3/07 at 09:20 PM |
|
|
quote: Originally posted by Macbeast
Imperial is the Dutch attitude to Indonesia
You Dutch-India
We don't want them back. First let us clean up the mess in Europe.
But I still think you should get that EURO-coin! And drive on the right side of the road
|
|
Peteff
|
posted on 30/3/07 at 09:32 PM |
|
|
And drive on the right side of the road
The left is the right side of the road
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
gazza285
|
posted on 30/3/07 at 09:51 PM |
|
|
I already drive on the right side of the car, you want me to drive on the wrong side of the road as well?
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
Taz Surfleet
|
posted on 30/3/07 at 09:56 PM |
|
|
Wish I'd known when I bought the joints Nick! will measure the brackets tomorrow and send u2u.
|
|
JB
|
posted on 31/3/07 at 04:40 AM |
|
|
Bolts
Aerospace bolts are the way to go for suspension etc. You know they are high quality, are plated and available in the correct length without having to
cut a load of thread off.
|
|