WAYNE10
|
| posted on 3/2/10 at 08:23 PM |
|
|
SEAT FITTING QUESTION
Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be
good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it
self will be ok for the IVA?
[Edited on 3/2/10 by WAYNE10]
|
|
|
|
|
mangogrooveworkshop
|
| posted on 3/2/10 at 08:58 PM |
|
|
jk composites
http://www.jkcomposites.com/
[Edited on 3-2-10 by mangogrooveworkshop]
|
|
|
mangogrooveworkshop
|
| posted on 3/2/10 at 09:14 PM |
|
|
We are still waiting for them to turnup but we just bolt them hard to the floor.
some use transit sliders others use metro hope that helps
pat
quote:
Originally posted by WAYNE10
Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be
good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it
self will be ok for the IVA?
[Edited on 3/2/10 by WAYNE10]
|
|
|
A1
|
| posted on 4/2/10 at 03:07 AM |
|
|
i made some brackets from square tube aluminium then bolted them straight through the floor.
|
|
|
The Black Flash
|
| posted on 8/2/10 at 11:21 PM |
|
|
If you want runners you can buy them with the seats, or seperately - they use the OMP ones you can get from demons or wherever. I bought some
recently, about 25 quid I think they were. Otherwise as others have said, bolt direct to the car.
|
|
|
eddie99
|
| posted on 8/2/10 at 11:23 PM |
|
|
I had a good conversation over the phone when i ordered my seats and i got them to fit the runners to the seat so it was very simple and i knew
runners/seat combo would work.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
WAYNE10
|
| posted on 9/2/10 at 09:28 AM |
|
|
I have been in touch with jk composites and they are not there seats so I still do not know the make. It looks like the main support fixings are on
the side so I think i will try and make a frame and mount that on some runners. If anyone has any pics of side mount frames that would help me a lot
.
Thanks
|
|
|
tritonseats
|
| posted on 4/3/10 at 11:58 AM |
|
|
quote:
Originally posted by WAYNE10
Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be
good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it
self will be ok for the IVA?
[Edited on 3/2/10 by WAYNE10]
We believe these seats are a GRP copy of
Reverie's Mulsanne Seat 
|
|
|
