Bumble
|
posted on 10/2/10 at 09:26 AM |
|
|
WTD......Steering Column Bush Kit
As the title says...I'm after a Steering Column Bush Kit to fit sierra column. Anyone have one or know best place to get one from.
Cheers,
Matt
|
|
|
Steve G
|
posted on 10/2/10 at 09:36 AM |
|
|
This one??
|
|
Bumble
|
posted on 10/2/10 at 09:41 AM |
|
|
Do you reckon that's the same as this
one??LINKY
|
|
Steve G
|
posted on 10/2/10 at 09:47 AM |
|
|
Looks it doesnt it!! Before you go that route though - have a read of this...
linky
there's a typo though - it should be an SLFL25 bearing as per
here
Well worth doing from the start
|
|
cd.thomson
|
posted on 10/2/10 at 09:58 AM |
|
|
quote: Originally posted by Steve G
Well worth doing from the start
+1 much, much, much better than the original!
Craig
|
|
Bumble
|
posted on 10/2/10 at 10:11 AM |
|
|
Hmmmm, interesting. Loooks relatively simple but as I already have a Sierra one fitted (theres a lot of play in it) what mod would I need to do to
bulkhead where the existing bush locates?
Cheers,
Matt
|
|
Steve G
|
posted on 10/2/10 at 10:40 AM |
|
|
quote: Originally posted by Bumble
Hmmmm, interesting. Loooks relatively simple but as I already have a Sierra one fitted (theres a lot of play in it) what mod would I need to do to
bulkhead where the existing bush locates?
Cheers,
Matt
To be honest - not much. Probably just open the hole up and drill a couple of mounting bolt holes.
From what i've read - the numbers of those who have upgraded like this from standard must be in the several dozens so you wont be the first to
do the bulkhead mods.
|
|
James
|
posted on 10/2/10 at 11:02 AM |
|
|
Think I bought mine from Lolocost. Bout £1.50?
Cheers,
James
|
|
bbwales
|
posted on 10/2/10 at 11:27 AM |
|
|
Hi,
You can get the bearings at 1" which fits the Sierra plastic bush perfectly without having to machine anything off. Eriks
http://www.eriks.co.uk/ do them and there are plenty of branches throughout the country.
Regards
Bob
|
|
miikae
|
posted on 10/2/10 at 12:00 PM |
|
|
Lots more info Here on this subject with links to various suppliers and
prices etc.
Mike
If it can be done it i will be done .
|
|
Bumble
|
posted on 10/2/10 at 02:08 PM |
|
|
Thanks everyone....I bought a 1" version (ref SBPFL205-16) from www.simplybearings.co.uk
£10.85 delivered.
I'll post some pics when it arrives and is fitted.
Cheers,
Matt
|
|