Louis M
|
posted on 10/6/04 at 12:49 AM |
|
|
Could I Use Someone's Solidworks File?
Instead of building my chassis from scratch on Solidworks, would it be possible if I could use someone's copy that I could modify for my
project? Thanks so much!
|
|
|
chrisf
|
posted on 10/6/04 at 04:25 PM |
|
|
SW files
Hi:
Run a search on 'marcel'. He has a SW file of a chassis. I'm sure he'll comment, but I think his deviates a bit from the book.
I would pass the file on to you, but not without permission.
--Chris
|
|
Louis M
|
posted on 10/6/04 at 04:40 PM |
|
|
Problem - marcel doesn't exist. I searched for him and he's not on here... Anyway, a good starting point would be if it was already
live-axle and front-engined.
|
|
flak monkey
|
posted on 10/6/04 at 08:57 PM |
|
|
What files will solid works open? I have dxf, IGES and dwg files...
David
Sera
http://www.motosera.com
|
|
Louis M
|
posted on 10/6/04 at 11:00 PM |
|
|
To be honest, I'm not totally sure. I know that .dwg and .dxf files will work, but I believe those are only for 2d... Best option would be to
post it and I'll try it out! BTW, if you don't want it public, my e-mail is LouisM at cox.net
|
|
Louis M
|
posted on 10/6/04 at 11:13 PM |
|
|
http://www.solidworks.com/pages/products/swofficepro/faqs.html?pid=1#6e
|
|
flak monkey
|
posted on 11/6/04 at 07:21 AM |
|
|
Louis, You have email...
Sera
http://www.motosera.com
|
|
chrisf
|
posted on 12/6/04 at 04:57 AM |
|
|
Mave
My mistake, Mave is the fellow with the SW chassis files (they are one in the same). Run a search on him. Great guy.
--Chris
|
|
Mave
|
posted on 12/6/04 at 08:56 AM |
|
|
Hi there! Here I am! Yep, I have made a SolidWorks drawing of a Seven with independant rear suspension, and inboard front suspension (you can find a
picture of it on my site www.mk-indy.nl, under About-Why an Indy). It is slightly wider than a "book-chassis" and based around the Sierra.
Let me know if you want a copy.
|
|