marcjagman
|
posted on 19/11/10 at 04:40 PM |
|
|
BEC springs
As per title really, after some front springs for a BEC. Don't want too soft, who sells them? Have looked for some but obviously not looking in
the right places, what poundage should I be looking for?
|
|
|
carnut
|
posted on 19/11/10 at 04:44 PM |
|
|
I have always got mine from www.dfaulknersprings.com. They are really helpful and do just about every rate and size you would ever need.
If its 1.9" springs your looking for I have 2x 175lb and 2 x 250lb (i'd have to check) from my Protec Shocks for sale.
|
|
marcjagman
|
posted on 19/11/10 at 04:46 PM |
|
|
Just measured them, 2 1/4 inch I.D.
[Edited on 19/11/10 by marcjagman]
|
|
CRAIGR
|
posted on 19/11/10 at 04:50 PM |
|
|
175lb would be too weak i would think on the front of a CEC or BEC
|
|
carnut
|
posted on 19/11/10 at 04:54 PM |
|
|
Appologies my memory is rubbish. They are 200LB and 350LB.
|
|
marcjagman
|
posted on 19/11/10 at 05:08 PM |
|
|
200lb would probably do but they're 2.25 ID.
|
|
Benzo
|
posted on 19/11/10 at 05:30 PM |
|
|
250's & 180's i run, got them from Rally design..
|
|
CRAIGR
|
posted on 19/11/10 at 06:10 PM |
|
|
Could do with some 9" 180's in 2 1/4 myself
|
|
marcjagman
|
posted on 19/11/10 at 06:30 PM |
|
|
Would 200lb springs be okay for the front of a BEC?
|
|
CRAIGR
|
posted on 19/11/10 at 07:04 PM |
|
|
Running 200's on my westfield but some mk's run a lot more
|
|
mark chandler
|
posted on 19/11/10 at 07:15 PM |
|
|
I have 250lb front, 200lb rear on mine, comfy on the road but a bit soft for the track I recon.
|
|
marcjagman
|
posted on 19/11/10 at 07:21 PM |
|
|
So for the front around 200-250lb and around 200lb for the rear on a BEC then? Did I mention I weigh 18 stone?
|
|
bob tatt
|
posted on 19/11/10 at 08:34 PM |
|
|
i got told 350 front 200 rear by mk for track work not got any yet was fearing a really bouncy ride on the road.
|
|
LBMEFM
|
posted on 19/11/10 at 11:25 PM |
|
|
MK's Indy run 300lbs (F) & 200lbs (R)
|
|
hobbsy
|
posted on 20/11/10 at 02:08 AM |
|
|
Hmm some of those figures seem a bit high.
BEC Furys run 180/130lb as std. I recently changed mine for 200/180 and I've just bought some 225's should I want to go stiffer on the
front.
|
|
Benzo
|
posted on 20/11/10 at 05:14 AM |
|
|
ive some springs at home, 2.25" either 180's or 250's, cant remember which ones i sold before, pm me!
|
|
procomp
|
posted on 20/11/10 at 11:20 AM |
|
|
Hi
It needs a bit more info before spring poundage's can be recommended. like what sort of angle the dampers are at and where they sit in
relationship to the wishbones. Without this info you could be 50Lb-75Lb out of the ballpark. IE throwing money away.
Cheers Matt
|
|