lotus_esprit_s1
|
| posted on 17/10/13 at 06:19 AM |
|
|
Westfield narrow chassis dimensions
Does anyone have any dimensions of narrow body westfield chassis, specifically the engine bay?
My own narrow body is in long term storage 200 miles away so can't currently measure it up, so I phoned westfield but they don't have any
dimensions available for the narrow body as it's been out of production 20 years. So then I logged onto westfeild forum but have to join WSCC to
participate (I was in it once, £30 for three pamphlets!)
Most important measurement is width of engine bay at end of nose cone, and also distance of steering column from car centreline at pedal box.
Thanks!
|
|
|
|
|
Nickp
|
| posted on 17/10/13 at 06:56 AM |
|
|
Got a mates SEi in the garage, will measure it in a bit (unless someone gets in first) 
|
|
|
lotus_esprit_s1
|
| posted on 17/10/13 at 09:18 AM |
|
|
Thanks. The engine (lotus) I want to fit protrudes 350mm from the centreline so needs 700mm minimum at end if nosecone. Can I take photo of it and
mark the measurements on it?
Thanks!
|
|
|
Nickp
|
| posted on 17/10/13 at 09:22 AM |
|
|
23" across front of bay to inside of rails
30" across rear of bay to inside of rails
Steering column starts 10" from centreline
Hope this helps,
Nick
|
|
|
Nickp
|
| posted on 17/10/13 at 09:29 AM |
|
|
quote:
Originally posted by lotus_esprit_s1
Thanks. The engine (lotus) I want to fit protrudes 350mm from the centreline so needs 700mm minimum at end if nosecone. Can I take photo of it and
mark the measurements on it?
Thanks!
The widest point at the rear is only 760mm. 700mm width is only about 200mm forward of that. So unless the Lotus engine is very compact at 200mm
length then I'd say NO it won't fit. Sorry fella 
|
|
|
dhutch
|
| posted on 17/10/13 at 12:18 PM |
|
|
PM'ed you.
|
|
|
Nickp
|
| posted on 17/10/13 at 01:05 PM |
|
|
Tbh I've just measured my Haynes chassis and that's only about 60mm wider at the same point so even that's nowhere near wide enough.
|
|
|
