Miks15
|
| posted on 31/3/14 at 08:15 PM |
|
|
Spray can paint advice
Hey guys,
Second spray can paint advice thread today. Last one for a while I promise 
I have a few motorbike bits that I need to spray. Ive got the paint to do the engine bits. But need some good paint to do the non high temp bits.
Mainly it will be things like the frame, swing arm, forks and wheels. They'll all be getting the black treatment.
Its my first bike rebuild and I want to do a proper job and have it last, so after some advice on some good black spray paint. Is the stuff you can
pick up from halfords any good, or should I be looking elsewhere?
Cheers
|
|
|
|
|
jossey
|
| posted on 31/3/14 at 08:25 PM |
|
|
I went to a proper paint place and they mixed me some up in a can bit cheaper and better paint. also I could choose the paint code like I would with
2k.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
davidimurray
|
| posted on 31/3/14 at 08:32 PM |
|
|
I'm using plastikote on my bike rebuild. Seems good so far but can't comment on longevitiy but I can get it from local diy place for less
than halfords paint.
Gallery 1 http://www.facebook.com/media/set/?set=a.116893465324.130778.601005324
Gallery 2 http://www.facebook.com/media/set/?set=a.245243755324.181913.601005324&l=a9831a9319
Gallery 3 http://www.facebook.com/media/set/?set=a.440671625324.232627.601005324&l=3f0d42c523
Gallery 4 http://www.facebook.com/media/set/?set=a.490098255324.297598.601005324&l=efb083b7df
Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5cd3a
Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=3&l=fe779b358c
Duratec Engine Swap https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f " target="_blank"> https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f
|
|
|
Slimy38
|
| posted on 31/3/14 at 08:44 PM |
|
|
I've used Halfords stuff, and thought it was ok until I got a pack from these guys;
http://www.paints4u.com/
They do a three pack of primer, top coat and clear coat, it's just so easy to apply and matches really well. They are also on Ebay, I
can't remember whether they're cheaper on there.
Swing arms can be a pain though, especially if you use a paddock stand without bobbins. I did mine with a matt black brush paint, and it seemed quite
tough until I chipped it on the stand.
|
|
|
jacko
|
| posted on 31/3/14 at 08:48 PM |
|
|
For black paint i use Halfords its the best paint i have used [ Thats black not other colours ]
Jacko
|
|
|
Miks15
|
| posted on 1/4/14 at 06:53 AM |
|
|
Cheers guys,
will have a look in halfords later tonight to see what options they have. Will have a look at a few online suppliers as well
|
|
|
