PSpirine
|
| posted on 4/4/15 at 10:02 PM |
|
|
Type 9 box + Zetec measurement needed!
All,
I'm about to fix some bits on my chassis, and make sure that the engine mount plates are in the correct place (chassis had a Pinto in it
previously and I'm cutting the mounts out as I'll be putting in a Zetec).
Can someone tell me what the distance in X axis (along centre line of vehicle) from the Type 9 gearbox mounting to the zetec engine mounts is (to the
hole that goes into the chassis plates that accept the rubber mount)
Apologies if vague, I can probably post up a drawing if it'll help!
Thanks
|
|
|
|
|
DIY Si
|
| posted on 5/4/15 at 12:28 PM |
|
|
I doubt you'll get an exact answer unless you're using an off the shelf mount. If you're making them yourself, you can put them
where fits best for your chosen design.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
|
