Rena
|
| posted on 27/12/16 at 03:21 PM |
|
|
Engine mounts?
Hi,
I need to weld up a new engine mount on the left side of the engine because I will try to fit a new exhaust manifold.
Is it possible to use the four holes (marked red) for engine mount or do I have to use one more hole (marked green)?
Where can I find a lasercutted plate?
[img] [/img]
|
|
|
|
|
loggyboy
|
| posted on 27/12/16 at 03:38 PM |
|
|
Any are suitable. I used those in red.
Plates were made up from blank plates and tube from ebay.
Mistral Motorsport
|
|
|
Rena
|
| posted on 27/12/16 at 04:17 PM |
|
|
Thanks!
|
|
|
coozer
|
| posted on 27/12/16 at 04:20 PM |
|
|
I used the back two red and the green one in a triangle..
Are you on Facebook? Dude near me makes plates for the stock car peeps. If your on fb let me know and I'll send you the link.
Steve
1972 V8 Jago
1980 Z750
|
|
|
ian locostzx9rc2
|
| posted on 27/12/16 at 04:25 PM |
|
|
I would use the back two red ones and the green one
|
|
|
Rena
|
| posted on 27/12/16 at 04:29 PM |
|
|
quote:
Originally posted by coozer
I used the back two red and the green one in a triangle..
Are you on Facebook? Dude near me makes plates for the stock car peeps. If your on fb let me know and I'll send you the link.
Steve
Yes I am, Fredrik Renå
|
|
|
coozer
|
| posted on 27/12/16 at 04:35 PM |
|
|
Sent it via messenger
1972 V8 Jago
1980 Z750
|
|
|
