Nick
|
| posted on 10/11/18 at 09:36 PM |
|
|
New chassis build
Just started building a the chassis from the haynes plans. Just seen some comments about doing things slightly differently to the book. Please could
someone point me in the right direction to these changes.
Thank you
|
|
|
|
|
Nick
|
| posted on 10/11/18 at 09:43 PM |
|
|
Also I cannot find easily any info about what angle to weld the plate to support the rear calipers on the rear uprights. I've seen somewhere
that the book is wrong in this area also. I have sierra diff shafts and hubs but no calipers and discs. What bits do I need to do this and what mods
need to be done to the bits I have.
Cheers dudes
|
|
|
ianhurley20
|
| posted on 11/11/18 at 08:34 AM |
|
|
Sylvain Vought has compiled all the ammendments and shares them here
https://drive.google.com/drive/folde...2xSRXZCdElrSEU
|
|
|
Nick
|
| posted on 11/11/18 at 08:50 AM |
|
|
Cheers Ian for reply but sadly the link doesn’t work. It just goes to an error message.🤬
|
|
|
scimjim
|
| posted on 11/11/18 at 09:12 AM |
|
|
Is this the right link?
|
|
|
ianhurley20
|
| posted on 11/11/18 at 09:18 AM |
|
|
That's the one!
|
|
|
Nick
|
| posted on 11/11/18 at 09:38 AM |
|
|
Brilliant cheers jim
|
|
|
