Mave
|
 posted on 25/4/03 at 07:27 AM |
|
|
material thickness rear uprights
After asking the Avon guys the same question (it is not specified in the book), I would like to know the same thing from the Indy-clan: can anyone
measure the material thickness of the rear uprights for me? I would like to have a reference which I can use in my design, and frankly, the Indy seems
to me a very good reference.
Thanks in advance!
|
|
|
|
|
mad-butcher
|
| posted on 25/4/03 at 07:02 PM |
|
|
gimme 3 guesses what rear uprights i'll settle for a cutting list reference number from the great mans book
tony
|
|
|
Mave
|
| posted on 28/4/03 at 07:40 AM |
|
|
Anyone? Pretty, pretty please?!?!?
|
|
|
James
|
| posted on 28/4/03 at 06:33 PM |
|
|
quote:
Originally posted by Mave
Anyone? Pretty, pretty please?!?!?
It's gonna be a bit of a challenge for someone unless they cut their w/bones open!
The tube I've used is (I believe) the same as MK's and it's 1.6mm 16swg. 16swg should be strong enough as that's what the book
w/bone tubes are. I hope! 
Cheers,
James
|
|
|
B3Saxo
|
| posted on 28/4/03 at 11:47 PM |
|
|
I think he's talking about the uprights not the wishbones.
According to my digital adjustable spanner, the upright is made from 3mm plate. 
Another quality post from B3Saxo!
|
|
|
Mave
|
| posted on 29/4/03 at 08:55 AM |
|
|
Yep, I was indeed talking about the uprights. B3Saxo, thanks a lot.
|
|
|
B3Saxo
|
| posted on 1/5/03 at 11:55 AM |
|
|
No probs! Bill is in the post!
Another quality post from B3Saxo!
|
|
|
