John P
|
| posted on 26/6/07 at 07:03 AM |
|
|
Chassis Mods for DeDion
Right, I’ve completed the front sections of my McSorley 7+4 chassis and now need to decide what mods (if any) are necessary at the rear to accept a
Rorty type DeDion assemble.
I’ve cot a copy of the GTS drawing showing mods to a standard chassis. Is this the best way to go?
John.
|
|
|
|
|
ecosse
|
| posted on 26/6/07 at 08:10 AM |
|
|
I used alterations along the lines of the GTS plans, although I added some additional bracing.
Apart from that you will need a couple of diff brackets and that should be about it.
Cheers
Alex
PS
Remember to allow for the extra width of your chassis on to the drawings 
|
|
|
