Board logo

FINISHED!!
A1 - 1/12/08 at 10:44 AM

just finished my indy! i believe its the first indy r r1?? correct me if im wrong!
now for sva!

jabbahutt - 1/12/08 at 10:48 AM

Congratulations!! best of luck if the SVA test.

Any photos of the completed beastie?

mangogrooveworkshop - 1/12/08 at 10:49 AM

quote:
Originally posted by A1
just finished my indy! i believe its the first indy r r1?? correct me if im wrong!
now for sva!



Sorry to inform you but you never finish these cars very well done

Mr Whippy - 1/12/08 at 11:03 AM

quote:
Originally posted by mangogrooveworkshop
quote:
Originally posted by A1
just finished my indy! i believe its the first indy r r1?? correct me if im wrong!
now for sva!



Sorry to inform you but you never finish these cars very well done


thats what I was thinking...

Rob WM - 1/12/08 at 12:24 PM

Great news

let us know how you get on at the SVA.

PAUL FISHER - 1/12/08 at 12:25 PM

quote:
Originally posted by A1
just finished my indy! i believe its the first indy r r1?? correct me if im wrong!
now for sva!



And sorry to inform you its not the 1st R1 powered Indy R either

A1 - 1/12/08 at 01:16 PM

aw! i thought it was...
yea, got a long list of improvements planned for her! ill take some pics today!

PAUL FISHER - 1/12/08 at 01:50 PM

Yes the 1st Indy R built was a R1 powered car,a black and red Virgin liveried demo car,I am sure a few people will have seen it,completed back in 2006,Its the car I drove on its debut at kitcar live at Donnington in that year,I also took it drag racing that year aswell,the car is still running well with its new owner,who now uses it mainly as a track car.

[Edited on 19/05/04 by PAUL FISHER]

speedyxjs - 1/12/08 at 02:28 PM

Good luck

A1 - 2/12/08 at 02:05 PM

a couple of photos...bear with me on the bootlid though...

A1 - 2/12/08 at 02:07 PM

actually...just look at my photos

INDY BIRD - 2/12/08 at 06:57 PM

Hi Hate to say it but dont think front indicators will pass sva need to be extended out but check sva requiremements on this

Hope it all goes well?

A1 - 3/12/08 at 01:51 AM

in the manual it says min seperation 500 unless vehicle width is les than 1400, in which case min sep. in 400...so methinks for the indy itll be 500.ill check the actual distances...more news in the morning!!

adithorp - 3/12/08 at 04:41 PM

It says, max distance from the SIDE 400mm with min separation of 500mm... See the top of the column.

The side is measured as the widest point so thats the rear wing width.

adrian

A1 - 3/12/08 at 11:45 PM

oh f**k...theyre over 500 apart, ill check the distance from the sides tomorrow!! fingers crossed!

A1 - 4/12/08 at 05:48 PM

ooh....erm, yea in thier current state, the inds wont pass...whats everyone else done here?just put them on stalks? ive never seen them on an indy that far out though...or do the extra lengths fall off on the ride home?
cheers folks!

adithorp - 5/12/08 at 01:12 PM

Think they just disolve away in the rain.

adrian