Board logo

Exhaust manifold wrap
lotusmadandy - 24/12/08 at 08:40 PM

As per the title, can any one recommend a supplier and how many meters might i need to wrap the manifold on my mates robin hood 2b.
Happy christmas everyone


Andy

Simon - 25/12/08 at 12:47 AM

OK, part one would be Car Builder Solutions, and part two, single cyl, 2, 4, 6, 8, or 12 cylinder. Original manifold, what manufacturer; aftermarket tuned length - length of primaries, do you want secondaries/collectors covered?

How long is a piece of string?

Happy Christmas

ATB

Simon

Richard Quinn - 25/12/08 at 09:47 AM

quote:
Originally posted by Simon
OK, part one would be Car Builder Solutions, and part two, single cyl, 2, 4, 6, 8, or 12 cylinder. Original manifold, what manufacturer; aftermarket tuned length - length of primaries, do you want secondaries/collectors covered?

How long is a piece of string?

Happy Christmas

ATB

Simon
2 x 1/2 its length!

Simon - 25/12/08 at 09:28 PM

2 x 1/2 = 1

ATB

Simon

Richard Quinn - 25/12/08 at 10:27 PM

quote:
Originally posted by Simon
2 x 1/2 = 1

ATB

Simon
Absolutely! 2 x 1/2 lengths is 1 full length. Should be just enough

lotusmadandy - 26/12/08 at 12:08 PM

DOH, i should have said,its a r/h stainless manifold that fit through the side panel of the car.I have not measured the length of the primaries,nor the diammeter ( didnt think in my drunken haze of christmas eve).i will tell him to buy one roll and take it from there.thanks all,

Andy