Another Indy about to undergo SVA! (at Exeter)
See the pics of the finished car in my archive under 'Ready for SVA!'
It's only taken 5 1/2 years!
[Edited on 9/2/09 by MautoK]
[Edited on 16/3/09 by MautoK]
Hi John i can,t see in your photos but do you have a cover on the + terminal on your battery you need one for the sva
Graham
Didn't you know new legislation bans autos?
Looks good! Thought you were doing a burn out in that first picture - then I saw it was exhaust smoke!
Graham,
The picture 'WillThisUpload.JPG' shows the battery in the boot, with the MK-supplied cover securely mounted on top.
I'm hoping that's adequate and sufficient!
Live post is the near corner, as you see it in the pic.
Cheers,
John.
I can see it now
I should have gone to specsavers
Graham
See my post in the SVA section, but briefly 'a good fail' on four points:
1. Speedo misbehaving
2. No main beam (relay or wiring issue - was OK recently!)
3. Hazard switch binding in dashboard hole
4. HT leads inadequately secured
Emissions, brakes, edges, etc all OK.
Passed today!
Waiting on DVLA & postman to get V5, etc
Well done,there's not many automatic Indys around