Board logo

master clinder
heyzee - 20/3/04 at 08:40 PM

can anyone tell me the measurement from the bottom chassis rail to the centre hole for the master cylinder in the bulkhead because ill have to drill mine out very shortly..

Mk-Ninja - 20/3/04 at 08:50 PM

75mm

HTH Gordon

heyzee - 21/3/04 at 10:08 AM

IS IT 75MM FROM THE FLOOR OR THE TOP OF THE BOTTOM RAIL

Mk-Ninja - 21/3/04 at 07:26 PM

Its 75mm from the CLine of the cylinder to the bottom of the lower chassis rail.

heyzee - 21/3/04 at 07:57 PM

thanks for that .thats the next job i think.