I currently have the stock zx12r can on my indy but i want to change it for a kit car specific one.

My link pipe for my exhaust is 2" OD so i need an exhaust that would slip over this.

Can somebody please advise where i can get one from and how much they cost?

And do they come with the hanger bracket so i can hold it in place?

one like this just for your info

Zorstec in Bradford - Have a look at there website

ooh i rocognise that piccy
the owner of that car is a good looking chap


u2u sent

Hi. I have an exhaust that I have just taken off my car. I was about to take it to the tip so if it is the type you want tou can have it for the cost of postage (or you can pick it up) I will try to get some measurements and pics tonight.

I got mine from mk engineering. is has the bracket on the exhaust but doesn't come with anything to attach it to the car.

I paid around £300 and that was including manifold, link pipe, box and delivery.

What is it that's "wrong" with your current setup?

when the car gets up to about 6000rpm and its really throwin out the gases they hit against the bottom of the arch and the noise doesnt sound to good, thats the main problem.

I dont like the sound of it as i want a smooth sound through till the end of the rev range.

I have the can as low down as it can go aswell and it still hits the bottom of the arch

Ah!
So you've got no exit bend on it

yeah thats wot i was getting at, lol, i have no exit bend and i want a can which has an exit bend to direct the fumes away. Where can i get one from and how much are they?

It needs to be slipped on to a 2" link.pipe

http://www.locostbuilders.co.uk/viewthread.php?tid=118871
Just the job