Board logo

Question to MK Indy R owners
Breaker - 17/4/10 at 06:14 PM

Hello,

End of last year I picked up my MK Indy R deluxe kit. This weekend I was trial fitting the front suspension and I seem to be missing some parts ?

I have the front rods to connect the suspension to the inboard shocks, but I can't find the rod end bearings + bushings for this ?




I thought these were included in the kit ?
I also seem to be missing some kind of bushings for the pedals....

austin man - 17/4/10 at 07:04 PM

I believe it is a bolt that is used and shimmed with washers either side. The pedal bushes are a black hard plastic / nylonand accept a M6 bolt

jack_t - 17/4/10 at 07:13 PM

correct there is no spacers for the rod ends you have to use washers or make a spacer

and the pedals should have a nlyon insert ( its what i would call a reducer and it is m8

Breaker - 17/4/10 at 07:15 PM

quote:
Originally posted by jack_t
correct there is no spacers for the rod ends you have to use washers or make a spacer

and the pedals should have a nlyon insert ( its what i would call a reducer and it is m8


OK, but the rod ends and the nylon inserts should be included in the kit, right ?

austin man - 17/4/10 at 08:05 PM

not sure the rod ends you refer to are rose joints, if the Indy r is a comprehensive kit then I would have thought they would be included

jack_t - 17/4/10 at 08:09 PM

the actual rod end/ rose joint is included in the kit as are the nylon bearings but the spacers that stop the rod ends/ rose joints from sliding laterally on the bolt are not

Breaker - 17/4/10 at 09:54 PM

quote:
Originally posted by jack_t
the actual rod end/ rose joint is included in the kit as are the nylon bearings but the spacers that stop the rod ends/ rose joints from sliding laterally on the bolt are not


Ok, I'll take another look. Otherwise I think MK has forgotten to add it to the delivery. I'll contact them...

Dan - 18/4/10 at 09:49 PM

The spacers came with my kit give them a bell their a decent bunch.