I have just recieved my new aero screen and tryed it for size looks kewl except one problem I can not see over it i no im not tall 5ft 9 but how do others see over you all cant be over 6ft.

are your seats bolted to floor or on runners/mounts?

I had this problem I am only 5' 6" so I reduced the height by triming down slightly. I did plan to fit a clear perspex trim but never did.

Cheers

Rich

My seat is on runners passengers fixed down. i did have clear persplex but liked the aero screens.

Ha Ha
Cheers Rich if I dont get it sorted I might need it to get to Stonleigh.

Terry, if you need some spacers for the runners to lift the seat giz a shout.

have You got any 8" Lol

Just the one like, and your not getting your hands on it!

hi, i am 5ft 4 or so, i have a bubble, i can not see the front, but never had any problems with that end.lol

i have 1 inch spacers i did have 3 inch spacers.

stuart

Which screen is it? the MK one or a carbon mods one etc? I had to fettle the tabs on the ends of my carbon mods one to let it sit a little lower - I'm 5'8 - couldn't raise the seat any higher or the roll bar would be useless.

Hobzy I got it off ebay its like yours but fibreglass and to see over it i reckon I need my seat up about 3" min

Ignore the one in my avatar - is yours like this:


aeroscreen4

If it is and it has the tabs on the end that wrap around the edge of the scuttle you could cut them off to lower the angle. Worked for me. My seat is a triton one on runners and a 3/4 spacer.

Its the same one as Jacko has, if dont mind having a look at my post in wanted (aeroscreen) you can see the one
Cheers

Ah ok, cant tell if it has tabs on at each bottom corner that fold over the dash - if it does take them off and you can change the angle, although you might have to add some more fixings to keep it from flexing.

Im 5ft 8ins and can see ok you tend to look round the bumps not over them
Jacko

Dash / wind deflector

[Edited on 29/4/10 by jacko]