what size and grade bolts do I need to get for the lobro joints. I'm using a caerbont speedo which picks up the pulses from the six lobro joint torx bolts the problem is I need to space them out by 1/4 of an inch. will be using allen bolts
many thanks
tony

safest bet will be 12.9 grade, for some reason these are usually unplated.



i]Originally posted by mad-butcher
what size and grade bolts do I need to get for the lobro joints. I'm using a caerbont speedo which picks up the pulses from the six lobro joint torx bolts the problem is I need to space them out by 1/4 of an inch. will be using allen bolts
many thanks
tony