Yeay she's back on the road, after nearly 6 months in the garage after an off track excursion my baby's back on the road. tried to get through MOT on satd'y an it failed on front brake balance. New pads fitted but still imbalanced...any ideas (oh i've swapped the discs over and shall take it back this afternoon to see if that cures it)

Cheers

Ben

Could have a sticking piston if its been stood for that long.

It passed....just! still needs sorting though, while the pads were out I pushed the piston out and back......seemed ok. Can you get pistons and seals to rebuild the hefty Sierra units? Other option is a nice Hispec setup :-)

Cheers, Ben

Squeeze them all the way back, lift the seal and WD40 them if they aren't leaking, then put some copperslip round them to keep moisture out and put the seals back. Messy but effective.

Just missed Newark by a day then Ben.....

Glad to hear she's back on the road. See ya soon

Yup, Saturday was spend buggering around at the MOT place or blasting around the local roads trying to get the brakes warm!!........still I've used 2 tanks of fuel so far, more sun please!

Don't think I missed too much at Newark, went to Sheffield on Sunday and on the way back saw Martin with the new beast on his trailer!!

Ben