Board logo

mk indy spring rates
matty h - 20/10/11 at 05:36 PM

What spring poundage is everyone running on the front of there car engined mk indies.
I have the original 350lbs but have read some people have fitted softer ones.
Thanks Matty


danny keenan - 20/10/11 at 06:23 PM

what engine have you got fitted?


matty h - 20/10/11 at 06:28 PM

2.0 8v vauxhall engine, cast bottom end and ali head.


danny keenan - 20/10/11 at 06:34 PM

if you think its to hard i have lots of 300lb or 275lb in stock.i would not go any lower than that.

thanks danny


austin man - 20/10/11 at 07:58 PM

I have 350s on my 1.8 zetec Have you adjusted the damper settings and it handles well enough. The bike engined chaps seem to fit softer ones


matty h - 20/10/11 at 08:15 PM

How many clicks are you running and do you have the protech dampers.
Thanks Matty