Board logo

damper question
pauladamss - 10/12/11 at 06:22 PM

I was fitting my dampers today and the instructions say lightest spring rating at the back(200lb) highest at the front (350lb)however writen on the boxes it says 300lb for rear and 275lb for the front. i am fitting a gsxr 1000 engine and the ratings in the instructions may be for a cec. Do i fit as per writen on the boxs or lightest at the back as per instructions??


danny keenan - 10/12/11 at 07:06 PM

hi paul

yes fit as it says on the box.in the manual its the spring rates on the old indy.

thanks danny


pauladamss - 10/12/11 at 07:23 PM

Hello danny just the person thanks for the reply i am also missing the the long m12x235mm for the rear wishbones.


danny keenan - 10/12/11 at 08:45 PM

hi paul

i will send them to you monday.hope all is going well with the build.

thanks danny


pauladamss - 10/12/11 at 09:14 PM

All is going well at the moment cheers