Yesterday i brought a set of pedals of MK, from Stafford, but they didnt have any bushes or brackets, but i can make them up at collage, but i never got the size of bolt they use to hold them in place, so does anyone know what size they need to be

Thanks Very Much

Phil

Hi Philip,
Think they use M8's and nylon as the insert for the pedals.
Mark

can confirm they are M8.

Thank V much

The brackets you need to manufacture yourself and weld to the chassis - if you need any help see our website. This should give you some idea

Sry 2 ask more questions, but can you plz tell me the thickness of the metal used to make the brackets

Thanks again

Phil

3mm if memory serves.

Be a lot easier to ask Phil to post you some nice laser cut jobbies.

the brake and clutch pedals are made out of 3mm but im not sure on the brackets themselves.

clutch and accelerator are 6mm and 3mm laser cut plate, brake pedal is 6mm bar.

all the brackets are 3mm plate.

and once again, here is my picture of the MK PEDALS, before you ask

tom

[Edited on 16/3/05 by indykid]
Rescued attachment pedals smaller.jpg