On another note, if anyone needs a tank modding or altering then if you can get it back to MK then I'll be glad to do it for a small financial reward.
Hi,
I have installed the plastic tank on my Indy with the fuel outlet on the RHS (offside) of the car. Now that I look at it I realise that because the
base of the tank tilts upwards the fuel pickup will not be in the lowest position in the tank which might make it more susceptable to fuel surge.
Have I put it in the wrong way round and in there a way of altering the fuel pickup pipe to place it in a lower position in the tank? (I don't want to
take it out again...)
Cheers
Paul
Surely someone can tell me what way round they have installed their plastic tank? Just need confirmation one way or the other
Cheers
Paul
I put mine in with the filler neck on the off-side but I have not run the car yet so I cannot comment how it performs (which is not particularly useful)
Looking forwards from the back of the car the filler is positioned to the right (offside) and the outlet to the left. This is the norm unless someone
has asked for a modification or a special request.
On another note, if anyone needs a tank modding or altering then if you can get it back to MK then I'll be glad to do it for a small financial
reward.
Oops, not a full answer was it? As for fuel surge, can't see a problem, the tank is baffled and as yet no reports of fuel starvation have been reported. These type of tanks have been supplied to MK for at least 2 years.
Whats with the new ident??? you just want to be a Noobie again don't you. Is this cause you gonna build a PROPER car with a PROPER engine, you know, one that revs properly!
Thanks for the feedback chaps. I have now switched the tank around as it puts the fuel outlet pipe in a lower position and the filler neck is in a
better position relative to the rear fibre glass panel when you use a 90 degree rubber fuel pipe.
Funny thing is that is seats better on the chassis the other way round and the black demo car at MK had the tank round this way (i.e. the wrong way)
.... Nevermind its all been sorted now
Cheers
Paul
quote:
Originally posted by Jasper
Whats with the new ident??? you just want to be a Noobie again don't you. Is this cause you gonna build a PROPER car with a PROPER engine, you know, one that revs properly!