Which way have you run the brake lines through the tunnel area? Anyone with pictures?
Is there supposed to be a bush in the hole designed for the steering column? Or does it just float In the centre supported by fresh air?
Thanks.
Hi
I'll email you some pics regarding where the brake lines go. They are from Bob's car and some may be up on his pic archive. But basically the hole
furthest back on the master cylinder goes 1st to the brake bias valve then down the tunnel to the rear where it splits using a T piece to each rear
brake. The front 2 holes go to the front brakes, 1 for each one.
As for the steering bush, order one from lolocost. they are £2.50! plus postage.
Laters
Andy
I have quite a few pics of brake pipe routing on my site as well. I kept the rear pipe low in the tunnel on the offside.
I reused the original steering bushes from the donor
Roger
We have a few in our Archive - not on Web yet...
Posted some into website this evening... happy viewing!
I've got pics of the pipe routing on my site
does the brake bias valve have to be used? I got the Brake pipe kit From MK and there seems no where for it to go!
Cheers
James
look at MK9rS set up on his site thats what i went by
cheers austin
still after super Ls?
we are ! wonder if the new shipments in
U2U me
quote:
Originally posted by auzziejim
does the brake bias valve have to be used? I got the Brake pipe kit From MK and there seems no where for it to go!
Cheers
James
hmmm bob help me out here buddy
Cheers
James