Board logo

rear arches
tricky262000 - 30/1/06 at 09:07 PM

I will be fitting the rear arches soon but just on the look out for the best place to get some piping i have looked at woolies rubber piping about 8mm is this the normal size? Anyone know where to source the foam and material for the dash covering and how thick should the foam be


UncleFista - 30/1/06 at 09:10 PM

For the dash foam, I used a cheap camping mat(for sleeping on). Cheap and waterproof (closed-cell)

HTH


blockhead_rich - 30/1/06 at 10:41 PM

I found the cheapest supplier of P shaped piping to be Robin Hood.......unless anyone else knows different of course.

Rich


Chippy - 30/1/06 at 11:17 PM

Vintage supplies, do a couple of different sizes.