Board logo

brake lines again
mad-butcher - 12/4/03 at 05:13 PM

first tnx to viper found the relevant section in the book of words. so they can go on at a latter date or go on the lads custom corsa. so does anyone have a closeup pic or two of the little bit of rigid pipe so I can see what fittings I need to scrounge
regards
Tony

Viper - 12/4/03 at 05:59 PM

Just posted a pc of a sva friendly braided brake pipe. not the bit you were looking for but it will give you an idea what ou will need to do to the goodridge hose you have..

wicket - 13/4/03 at 03:29 PM

Viper

Who's the supplier of the SVA friendly brake hose in the picture ?

Viper - 13/4/03 at 03:37 PM

That is actualy off of a TVR (just happened to be donated a set of four )

locodude - 13/4/03 at 03:45 PM

Tony
MK can now supply these at £10 each I think. Just cover them in spiral wrap for the test.

wicket - 14/4/03 at 07:27 PM

BSR-Aerotek have a range of 'SVA compliant' swaged hoses called Moto-flex which can be fitted with coloured sleeving to protect for the abrasive braid. Talk to Terry, really helpful.

www.bsr-aerotek.com

Viper - 14/4/03 at 08:52 PM

quote:
Originally posted by Viper
That is actualy off of a TVR (just happened to be donated a set of four )


under the wrap there is a label says Goodridge..