Is MKs radiator enough for an 2.0 zetec?

Should be. Plenty turn up at factory and havent heard of any problems.

Anyone know if they are new or just polished old ones?

They are new and have modified inlet/outlet bosses plus an adapter thread for the fan switch.

Up you go


All you with Zetec and MK Radiator. Do you use the thermostat built in to the zetec engine and plug the M22 thread in the radiator or a thermostat in the rad?

I got no thermostat for the rad I got from MK, anyone know the part # for that?

Hi Jonte

Polo Rad 1.0/1.05 1983 to 1990

Does the job just fine for a lot less ££'s

I used the 22mm thread in the rad for my fan switch and inlet outlet pipes are on the correct side too.
Rescued attachment zetec plumbing 007.jpg

well, I already got a MK rad in my garage. But thanks for the reply

hi Jonte, have you got a picture of the mk rad?

thanks

stuart

i am using mk rad on a 2.0l zetec with a radiator fan switch supplied by mk seems to work fine. the thermostat housing has the sender for the temp gauge and coolant sensor for ecu megasquirt

quote:

---

Originally posted by Stuart_B
hi Jonte, have you got a picture of the mk rad?

thanks

stuart

---

mk rad

thanks, i know what they do now.

stuart