hi guys i attaching a pic of the above i cant get the outer plastic part of the bush to fit in the rubber grommet correctly .should the outer plastic part fit right inside the rubber grommet.

or has anyone got a pic of there steering i could have a look at thanks once again simon

used washing up liquid to get mine in

plus...is it me, or have you got it the wrong way around.?

In your picture would the steering wheel be to the left? If so the bush is fitted wrongly,
Steve.

[Edited on 19/3/07 by stevec]

the bush is definitely fitted the wrong way round, and it shouldn't be too much trouble to get it in right.

just lube it up a bit if it is tight.

tom

so should it be fitted, so that the domed end is facing the engine bay (flat end inside car?)

also should the inner bush fit right inside the black rubber grommet like this ?

yep, so when you're sat in the car, that top face is nearest you.

tom

I think we had this discussion a few weeks ago.

Yep. http://www.locostbuilders.co.uk/viewthread.php?tid=62365
& I beleive I u2u'd you as well with details as pictured & described above.

[Edited on 20/3/07 by jollygreengiant]

You might need to ease the hole the rubber bit sits in so the rubber can expand a bit with the bush pushed in

caber

C-3PO to Chewie: "What? I'm backwards! You great, furry...."

is the wrong way and should fit in ok with some persisting