I am scratching my head to how the rear panel, wings and side sit at the back. I cant remember who's building an Indy spec R to check their photo archive.

Pics or a list of builders would be useful

Thanks Paul

It's the same bodywork as the Indy and therefore should fit the same shouldn't it ?? Try dropping Paul Fisher a U2U.

Phil

I am, but a) I haven't fitted the bodywork either yet, and b) my chassis appears to be different to yours at the back anyway (my rollbar is slightly wider and extends all the way down the side to the floorpan in a single piece). I'm not sure when that got changed, Paul's is a couple of chassis before mine I think (mine is no. 8 I think). So, i'm no use to anyone once again

All my pics are here for what it's worth


[Edited on 30/11/07 by martyn_16v]

I'm at the same stage, it seems pretty straight forward to me. The famous gap between the rear body panel and the side rails needs to be filled up, i'll use a ally bar for that.

http://www.elitesqd.com/modules.php?name=Forums&file=viewtopic&p=1838#1838

quote:

---

Originally posted by lococost
I'm at the same stage, it seems pretty straight forward to me. The famous gap between the rear body panel and the side rails needs to be filled up, i'll use a ally bar for that.

http://www.elitesqd.com/modules.php?name=Forums&file=viewtopic&p=1838#1838

---