Board logo

MK Indy Pipework/cable routings
JEPY - 10/2/08 at 05:22 PM

Hi all,

Has anyone got any photos of the routing of the brake, fuel and wiring loom taken through the transmission tunnel. Also the routing of the brake lines where they change from copper to braided hose.

Is there any one way that is neater/more logical?

Also any advice as where's best to mount the fuel pump?

I took a load of photos of some part built cars when I last visited MK in October but unfortunately promptly deleted them and my memory's not so good.

Any help greatly appreciated.

Thanks
James

PS Building a zetec engined Indy running fuel injection.


mike smith1 - 10/2/08 at 05:35 PM

Hope these are of some help. Rescued attachment Brake Lines Front.jpg
Rescued attachment Brake Lines Front.jpg


mike smith1 - 10/2/08 at 05:36 PM

tunnel Rescued attachment Brake and Fuel lines in tunnel.jpg
Rescued attachment Brake and Fuel lines in tunnel.jpg


JEPY - 11/2/08 at 07:39 PM

Cheers Mike, much appreciated


jabbahutt - 18/2/08 at 10:24 AM

Jepy

Where in cheshire are you? I'm just outside Chester and hopefully on the home straight of my build.

You're more than welcome to pop over and take photos if it helps

drop me a U2U if you need any help.

Jabba