what have people put between their rear wings and side/rear panels??
also where can i get some
thanks

"Tadpole" Trim and it's available from loads of places including your manufacturer!

Steve

Tadpole trim.

http://www.woolies-trim.co.uk/c-322-extrusion.aspx

I think I used R97.

There will be other suppliers, like Car Builder Solutions, or Europa.

HTH

Mike

http://www.cbsonline.co.uk/wing-piping--trmpi-1569-p.asp

HTH

Mike

thanks folks been messing with u-trim and plain round trim for ages

slight hijack!
what trim do you guys use for around the seat harness holes, i've got standard grp seats.

i used u trim from woolies follow the link in the top post by guiness

Word of warning here, use the "Herringbone Trim, with sprung steel insert" rather than plain u trim!

http://www.woolies-trim.co.uk/c-330-pvc-edge-trims.aspx

I watched in horror as the u-section trim on my front wings came off on the by-pass at 70mph on my way to the SVA!

HTH!

Mike

hmmm on the way to sva isn't good! normally it falls off after the sva

thanks for the link

[Edited on 23/3/08 by Johneturbo]