what size spanner do i need for the nuts on the top wish bones, front and rear.

40mm springs to mind ?

40mm!! thats huge!!

19mm at a guess

If it's the one holding on the top wishbone with the 12mm thread through the poly-bushes - the size is 19mm AF.

Steve

19mm or3/4AF

It's not 22, just checked, but a bit bigger.

It's for the nut on the M18 transit drag link, yes?

its the one at the back that comes undone, theres 3 on each side.

I think he probably means the ones to adjust the camber!

38mm rings a bell for the back, but I'm not sure. The front is much smaller, maybe 22-24mm?

Hi the STD size nut/spanner for the 18MM transit thread is 27mm. However i seem to remember that the thread and adjuster on the back end are of a larger size. Or is that one of the other manufacturers.

Cheers Matt

Definatly 38 or 40mm i cant remember which, i'll confirm later as i'll be checking my nuts before i go out for a blast!

[Edited on 14/4/08 by mike smith1]

quote:

---

Originally posted by mike smith1
Definatly 38 or 40mm i cant remember which, i'll confirm later as i'll be checking my nuts before i go out for a blast!

[Edited on 14/4/08 by mike smith1]

---