hi all i was wondering if anywon had any ideas wot i could use for indicator switch and main beam if i was to remove it all from sierra collum i have been thinking for days an just cant come up with anything please help its driving me mad ???????

How bout some switches for it all instead. Europaspares do the small round ally ones.
Adam

will it pass sva with switches on dash???

It will if they are sva approved ones. The push button motorsport ones are fine as they have a tiny radius. If your worried put them in the area behind or around the sterring wheel of 127mm which is exempt from sva

[Edited on 29/4/08 by bassett]

thanks for the info

If it's just the fact that you don't like the look of the Sierra switches, you can modify them as I did.

If the stalk is sawn off just above the little flat bit inside the shroud you will find a small hole. You can glue a steel pin into there, then a nicer stalk onto that.

I did my new stalk on my lathe, but there used to be someone on ebay selling suitable items.