Board logo

engine bolts
A1 - 16/9/08 at 12:39 PM

ive put my r1 engine in using plated threaded bar, is this strong enough?


02GF74 - 16/9/08 at 01:07 PM

depends on diameter of the bar.

you can purchase 8.8 threaded studding - same rating as 8.8 bolts.


Paul TigerB6 - 16/9/08 at 01:38 PM

As above, i'd use at least 8.8 threaded studding rather than some cheap stuff from B&Q.