Board logo

sierra hub nut torque settings
MikeFellows - 21/6/12 at 11:10 AM

can anyone tell me the torque settings for the sierra hub nuts on the end of the drive shafts please

I dont have a sierra haynes manual and cant find one anywhere

if front and back are different could I have both please

thanks

Ben_Copeland - 21/6/12 at 11:20 AM

http://www.locostbuilders.co.uk/viewthread.php?tid=143006

Or google sierra hub nut torque it brings up several posted on LCB

MikeFellows - 21/6/12 at 11:37 AM

Thanks

i did google it and got a few different answers, so was just as eay to ask for confirmation, before I ruin another set

mcerd1 - 21/6/12 at 12:31 PM

which kind of driveshafts/hubs is this for ?


I can check the books tonight if need be...

MikeFellows - 21/6/12 at 03:16 PM

its the bolt on shafts type, i never thought about the difference

thanks

Peteff - 21/6/12 at 04:03 PM

Keep pulling till the veins stand out on your temples, then get a longer bar and do it again Rears 250 to 290nm, 185 to214 lb ft. Fronts 310 to 350nm 229 to 258 lb ft.

mcerd1 - 21/6/12 at 11:18 PM

quote:
Originally posted by MikeFellows
its the bolt on shafts type, i never thought about the difference

thanks


well as it turns out they are all the same torque anyway

I've checked the normal sierra, XR4x4/V6, cosworth and granada manuals and they all say 250 - 290 Nm on the rears

the front's are diffrent though...