Board logo

Fuel pump, pressure reg, M16 calipers, roll bar, wishbones
Jenko - 18/8/16 at 08:12 AM

Lots of stuff that needs to go, I can send pics if needed:



[Edited on 18/8/16 by Jenko]

[Edited on 19/8/16 by Jenko]


Mash - 18/8/16 at 01:13 PM

Would the pump and pressure regulator be any goo for my Pinto Mate? I'm looking for an under bonnet pump, so, long suck, short blow, currently for a standard carb, but eventually moving to bike carbs.


Jenko - 18/8/16 at 01:25 PM

Pretty sure they would be perfect.....this is the pump:

http://i34.photobucket.com/albums/d102/jenkosrugby/Mobile %20Uploads/20160731_155706.jpg

And this is the filter:

http://i34.photobucket.com/albums/d102/jenkosrugby/Mobile %20Uploads/20160721_073529.jpg


Mash - 18/8/16 at 08:12 PM

I'll take them both then Jenko

I'm only about half an hour up the road from you (A31 permitting ) so could collect, can you knock a bit off the price for that ?

Cheers,

Mash


Gadgetman - 18/8/16 at 10:29 PM

Hi Jenko, which type of standard roll bar is it, the sloping shouldered version?

If it is I'll take it please!

Dave

Will leave a message on WSCC too!


Alexd186 - 19/8/16 at 06:17 PM

Hi Ill take the calipers, can you u2u your paypal address.

Thanks
Alex