Board logo

Garage clear out part 2
Lars - 23/4/22 at 12:12 PM














[Edited on 23/4/22 by Lars]

snapper - 24/4/22 at 05:29 AM

nick205 - 25/4/22 at 11:27 AM

I wore a full face helmet in my MK Indy.

1. Helped cut down the wind noise
2. Reduced the risk of stones or insects in the face

Deckman001 - 25/4/22 at 03:08 PM

Hi Lars, I might be interested in the GSXR inlet trumpets, although am not sure if they'd fit a gsxr600 ?

Jason

Mr Whippy - 26/4/22 at 06:19 AM

quote:
Originally posted by nick205
I wore a full face helmet in my MK Indy.

1. Helped cut down the wind noise
2. Reduced the risk of stones or insects in the face


Totally agree, the risk of getting hit in the face with a stone is just way to high if you have not got a windscreen.

Lars - 26/4/22 at 06:55 AM

unfortunately not sure how the different throttle bodies compare.

However have taken some measurement of the trumpets in case it helps.
the internal diameter where they mount to the throttle body is approx 53-54mm
In terms of height short ones are 45mm tall and long ones 60mm.

Let me know if you need anything else.


quote:
Originally posted by Deckman001
Hi Lars, I might be interested in the GSXR inlet trumpets, although am not sure if they'd fit a gsxr600 ?

Jason

Lars - 26/4/22 at 07:25 AM

Deckman001 - 27/4/22 at 11:50 AM

quote:
Originally posted by Lars
unfortunately not sure how the different throttle bodies compare.

However have taken some measurement of the trumpets in case it helps.
the internal diameter where they mount to the throttle body is approx 53-54mm
In terms of height short ones are 45mm tall and long ones 60mm.

Let me know if you need anything else.


quote:
Originally posted by Deckman001
Hi Lars, I might be interested in the GSXR inlet trumpets, although am not sure if they'd fit a gsxr600 ?

Jason


Thanks for that, It looks like they are too big for my dinky carbs so I'll have to keep looking for others, thanks anyway and good luck with everything.

jps - 28/4/22 at 07:11 AM

Hi Lars, is the brake line copper or kunifer? I can't tell from the picture.

Lars - 28/4/22 at 12:40 PM

Hi Jps

It says pure copper, but I have someone arranged to pick it up.


Lars

Lars - 7/8/22 at 12:59 PM

Hi All

I have a few final bits left.

Just want them gone, so available free of charge.
However would like it to go as one lot and must be collected from Didcot by next Sunday.

• Fuseboxes x4 (unused)
• Indicators
• GSXR Inlet trumpets x8
• Reversing light, inc. spare mount
• Black leather handbrake and gear lever gaiter
• TIM rev counter
• accelerator pedal (top mount)
• S/S cable ties

I also have a few hose clips of varying sizes that I am happy to part with.

Lars