Board logo

WTD. 10 mm Soft copper tube
Chippy - 20/12/08 at 11:40 PM

Hi, been trying to get hold of two meters of the above. Seems localy that I can only buy a roll for £39. Anybody got a couple of meters they could sell me. Cheers Ray


ashg - 21/12/08 at 01:00 AM

i planned to buy some after christmas to do my fuel tubing can go halfs on a roll if you like.


smudge88 - 21/12/08 at 03:22 AM

Hi Ray

I will pop a couple of meters round to Robin’s so next time you come over to see him it will be there.
I assume you mean 10mm O/D

Later

Grant


dogwood - 21/12/08 at 09:23 AM

Get some ordinary 10mm tube and anneal it.
It's a lot cheaper than buying a roll.

just incase you don't know,
Heat it up, almost cherry red then quench it in cold water.
Like butter after.

HTH David


austin man - 21/12/08 at 04:32 PM

have you tried Wickes (Builders merchants) I bought a roll to use for fuel line dont think it was too expensive.


Chippy - 21/12/08 at 10:45 PM

Hi Guy's, thanks for all the input, now got some from smudge88. Cheers Ray