Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec
head.
I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.
Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring beer
If anybody could help in anyway with the above that would be really great.
Cheers
Rich
I've got a spare head, but probably a bit far away!
Stu
quote:
Originally posted by RichardK
Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec head.
I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.
Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring beer![]()
If anybody could help in anyway with the above that would be really great.
Cheers
Rich
Norm, you're a star, I'll send you a u2u.
Cheers
Rich
Hi Rich.
U2U replied to!!!!!!!!!!!!!!!!!!!!!!!!