Im looking for an exhaust manifold plate or exhaust manifold and pipes to fit a 1.8 Ford CVH.
Ive got the silencer / cat but looking for pretty much everything in between! Also got a 4 into 1 if I need.
A perfect solution would be a manifold that drops the 4 pipes out the left side and runs back as far as the dash.
Cut Westfield 1.6CVH down pipe?
Could you u2u me a pic?
I've got one I don't need, drop me a U2U
Oops, just checked - it's a CVH inlet manifold - sorry to get your hopes up. The exhaust manifold is a Zetec one.
Apologies
[Edited on 17/11/11 by tims31]
I have no photos (I don't have the down pipe), there are some photos on here, or maybe in the westfield on-line shop?
Hi
I have an Ashley tubular steel manifold for a 1.6CVH(XR2/3)
This has been modified for rear wheel drive use in my locost. Not sure if it will fit the 1.8 engine, but will post photos tonight when I get in if
you're interested.
Richard
It would be handy if the original poster would post as to whether he has found an the part he's looking for - would save me and others who have
replied from having to check back every day for any replies.
Thanks
Richard
Hi Richard,
Sorry I missed your reply, I did not find what I was looking for.
I have ended up taking the car to a local custom exhaust shop to make sure I get a manifold that fits the car. From what i've read the 1.6 is
identical to 1.8.
Thanks,
Jon
quote:
Originally posted by Jon Hazan
Hi Richard,
Sorry I missed your reply, I did not find what I was looking for.
I have ended up taking the car to a local custom exhaust shop to make sure I get a manifold that fits the car. From what i've read the 1.6 is identical to 1.8.
Thanks,
Jon