Board logo

How to mount an omex 600 ecu?
adrianreeve - 22/2/12 at 07:50 AM

For those of you with an omex 600 ecu, how have you mounted it, as there don't appear to be any mounting points?

Cheers

Adrian

andy350z - 22/2/12 at 08:01 AM

My 200 which i assume is the same case is mounted on velcro tape.

owelly - 22/2/12 at 09:33 AM

Try approaching from the rear with a firm grip around its waist.

eddie99 - 22/2/12 at 10:12 AM

Yup I used Velcro as well!

atspeed racing - 22/2/12 at 10:13 AM

We use Velcro.

karlak - 22/2/12 at 10:25 AM

I guess this leads onto the next question.... Where is the preferred location to place the OMEX.

Are they OK in the engine bay or is behind the Dash a better option?

atspeed racing - 22/2/12 at 10:50 AM

Any where will do, but bear in mind excess heat, water and ECU's do not live well together. On a kit car we always try to mount under the dashboard.

bi22le - 22/2/12 at 01:27 PM

My 700 is mounted behind the dash with velcro. Access hole just nest to it to get a programming lead up and into the side of it.

Hector.Brocklebank - 22/2/12 at 07:15 PM

quote:
Originally posted by owelly
Try approaching from the rear with a firm grip around its waist.


that sounds rather rude............................................